The E-extinguishing lance®

for extinguishing the drive battery of electric vehicles, insulated up to 1,000 V, made of stainless steel, Clearly stored in an aluminium box.

Kit contents:

Bracket handle with hand guard and impact plate in reinforced design
Insulation in red colour
Extension tube length 500 mm
Optimised impact nozzle with 3 nozzle holes and depth limiter
Connection coupling Storz D, with hole M8 for earthing screw

Total length 670/1,150 mm (without/with extension tube). Weight approx. 8.1 kg. For earthing (equipotential bonding), use only material approved for use by the fire brigade, e. g. earthing kit RW/GW-G (item no. 275849).

>> Item No. 163658 E-extinguishing lance®

E-extinguishing box 1.1

E-extinguishing box 1.1, equipped
for extinguishing the drive battery of
electric vehicles, insulated up to 1,000 V

Kit contents:

1 E-extinguishing lance® MURER® 2.0
1 extension tube 500 mm
1 extension tube 250 mm
1 optimised impact nozzle
1 E-spacer
1 Mini-coupling spanner UNISEK ABCD
1 pressure hose synthetic signal fluorescent yellow, D 25, length 15 m
1 transition piece C-D
1 E-pressure reducer
1 double open-ended spanner 24x27
1 box type 1 with lid, (LxBxH) 600x400x220 mm
1 foam insert for clear storage

Total weight approx. 19.7 kg

>> Item no. 163659 E-extinguishing box 1.1

E-pressure reducer MURER®

E-pressure reducer MURER®, connection Storz D on both sides. Adjusted pressure reduction to 3 bar outlet pressure at 8 bar inlet pressure. The special pipe E-extinguishing lance® and conventional fire fighting can be carried out by the same pump if the pump is operated with an outlet pressure of
approx. 8 bar. Can be coupled into the D-pipe regardless of position. Weight approx. 0.9 kg

>> Item no. 163657 E-pressure reducer MURER®

E-spacer for the E-extinguishing lance®

For a secure distance when fixing the E-Lance® during hammering into the battery. The fixing is made of high-strength aluminium alloy by means of a retaining ring that can be adjusted with a knurled screw. The handle has cold and impact protection and is insulated up to 1000 V, length 1000 mm, weight approx. 1.8 kg and can be operated in all positions. The electric spacer can be separated for transport and can be stored in the electric extinguishing box. The retaining ring can remain permanently attached to the E-Suppression Lance® for rapid deployment.

The E-extinguishing lance®